In every field there is some basic strategy to become a professional in that field, it is also in computer science, and you have to know the basic techniques to be good at it. It is when you know the basics that you can start to improve them.
In this article I will share with you his 6 techniques/strategies to become your own computer engineer so you don’t have to call an engineer when your computer breaks down.
1. DO NOT FEEL FRUSTRATED
Don’t be afraid of computer problems. It is often the best opportunity to learn. Troubleshooting is part of the fun of owning a computer. Imagine the satisfaction you could get from solving a problem yourself.
Of course, the fun could wear out quickly once you get frustrated and have spent too much time on the same problem. If you’re feeling frustrated, it’s time to put it down for a while and come back with some new ideas.
2. TRUST
Trust is the first technique to solve any computer problem, believing that you solve the problem will make your mind think and also make you not to give up the problem, it encourages you to take action and you will be surprised to know that you have to solve the problem because your trust was in its place.
3. RESEARCH
In computer engineering, research is a major criterion if it is to be relevant. The difference between you and the other engineer is just the amount of knowledge you have in the field and this knowledge comes from deep research. how to do research, if you have a problem and don’t know what to do, just examine the problem, then go to the net and find solutions for that problem. For example, if your computer has the Raila Odinga virus and your antivirus is not removing it, you can write how to remove Raila Odinga manually on google.com, read the sites that tell you what you want to know about it, click the site to read the complete details that way you have the right knowledge to solve the problem. Keep in mind that there is no problem you will find on your computer that no one else has found, so going online to search for a solution is a smart way to solve the problem.
4. TRIAL AND ERROR
When your computer encounters a hardware problem, what you need to do is to know the type of problem and the hardware responsible for the problem, because personal computers are highly modular in design. The most powerful technique is to isolate a specific component by trial and error. Swap compatible components and see if the system still works. Try those peripherals on different machines and see if the same problem occurs. Make one change at a time.
5. ALWAYS TAKE NOTE
Take notes of what you have done and any error messages. You may need to use them later. For example, when you see an unusual blue screen with an error message. Copy the entire message onto a piece of paper. In many situations, that message can point you in the right direction to resolve the issue quickly. Always remember to use the internet when it gets tough.
6. HARDWARE TROUBLESHOOTING
It’s okay to open a computer case and look inside. Only 5V and 12V DC voltage is supplied to components outside of the power supply. Those who have never seen the inside of a computer are often surprised at how simple it looks. Of course, always turn off and unplug the power cord first.
More than 70% of all computer problems are related to cabling and connections. Make sure all cables are firmly connected. IDE and floppy ribbon cables and power cables can often come loose. Make sure that the microprocessor, memory modules and adapters, such as the video card and sound card, are inserted correctly and do not “pop out” during transport.
